vi
Use correctly sized wires
To connect a load to the power supply, use a wire diameter large enough to handle the
maximum continuous output short-circuit current of the power supply without the wire
overheating.
For continued safe use of the instrument
• Do not place heavy objects on the instrument.
• Do not obstruct cooling air flow to the instrument.
• Do not place a hot soldering iron on the instrument.
• Do not pull the instrument with the power cord, connected probe, or connected test
lead.
• Do not move the instrument when a probe is connected to a circuit being tested
www.GlobalTestSupply.com
Quality BK Precision Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
