Page 155
724-746-5500 | blackbox.com
Chapter 4: Configuration
OSD
• Select Configuration > Switch in the main menu.
Figure 4-68. Menu Configuration—Switch.
To configure parallel operation, proceed as follows:
1. Activate the Enable Video Sharing function.
2. Activate the Force Connect function.
3. Activate the Keyboard Connect function, if taking over control by a keyboard
event should be possible.
4. Activate the Mouse Connect function, if taking over control by a keyboard
movement should be possible.
5. Define a Release Time of inactivity (0–999 sec.) after which control can be
taken over.
To Next Page
Loading...
Need help?
General
