Page 162
724-746-5500 | blackbox.com
Chapter 4: Configuration
Java Tool
To save the configuration into the internal matrix memory, proceed as follows:
1. Select “File > Upload to…” in the menu bar.
2. Enter the IP address of the matrix, your user name, and your password, and
and confirm the inputs. Press the “Next” button.
3. Select the storage location where the configuration will be saved (default or
config01–config08). Press the “OK” button to confirm.
Figure 4-75. Menu File—Upload to screen.
4.10.3 Loading of Configurations (Internal)
Previously saved configurations are loaded in this menu.
You have the following possibilities to load configurations from files:
Figure 4-76. OSD and Java icons.
In Active, the currently loaded configuration is displayed.
To Next Page
Loading...
