Page 67
724-746-5500 | blackbox.com
Chapter 2: Overview
You can access the menu via OSD or Java:
Figure 2-55. OSD and Java icons.
OSD
To activate SNMP via OSD, follow these steps:
1. Select “Configuration > SNMP” in the main menu.
Figure 2-56.
2. Set the “Enable” option to “Y” (Yes) under SNMP Agent. Activating this option
grants permission to run an active query of the SNMP agent.
To activate the SNMP agent, proceed as follows:
1. Select “Configuration > SNMP” in the main menu.
2. Set the “Enable Traps” option to “Y” (Yes) within SNMP server. This function
allows an active transmission of trap messages from the SNMP agent to the
SNMP server.
To Next Page
Loading...
Need help?
General
