Visually inspect the brake pads
to ascertain their thickness.
Viewing direction: from the
right toward brake pads 1.
Brake-pad wear limit of
parking brake
min 1.0 mm
If the wear indicating marks are
no longer visible:
Brake pads worn past the
minimum permissible thick-
ness can cause a reduction in
braking efficiency and under
certain circumstances they can
cause damage to the brake sys-
tem.
In order to ensure the dependab-
ility of the brake system, do not
permit the brake pads to wear
past the minimum permissible
thickness.
Have the brake pads
replaced by an authorised
BMW Motorrad dealer.
Check the brake-fluid
level, front brakes
A low fluid level in the
brake reservoir can allow air
to penetrate the brake system.
This significantly reduces braking
efficiency.
Check the brake-fluid level at
regular intervals.
Make sure the ground is level
and firm and place the E-
Scooter on its centre stand.
9
91
z
Maintenance
To Next Page
Loading...
