Table of Contents
BOMAG 5BMP 8500
Technical Data 7
Safety regulations 13
Indicators and Controls 23
3.1 General notes 26
3.2 Description of indicators and control elements 26
Operation 31
4.1 General 32
4.2 Tests before taking into operation 32
4.3 BOSS safety system 33
4.4 Starting the engine 34
4.5 Driving the machine (cable remote control) 36
4.6 Safety inspection for the cable remote control 39
4.7 Switching the vibration on and off 39
4.8 Shut down the engine 41
4.9 Shutting down the engine manually 42
4.10 Starting operation of the radio remote control 43
4.11 Replacing, recharging the radio remote control power pack 47
4.12 Safety inspection for the radio remote control 49
4.13 Switching off of the radio remote control in case of radio interferences 50
4.14 Switching ECO-mode on and off 50
4.15 Entering the machine type code 51
4.16 Teaching the BOSS safety system transponder 52
4.17 Assembling/removing the drum extension 53
4.18 Loading and transport 53
Maintenance 55
5.1 General notes on maintenance 56
5.2 Fuels and lubricants 57
5.3 Table of fuels and lubricants 60
5.4 Running-in instructions 61
5.5 Maintenance table 62
5.6 Check the engine oil level 65
5.7 Checking the hydraulic oil level 65
5.8 Checking the fuel level 66
5.9 Check the water separator 66
5.10 Checking the coolant level 67
5.11 Check the air intake hose 69
5.12 Changing engine oil and oil filter 69
5.13 Checking, tensioning, replacing the V-belt 71
5.14 Clean the cooling fins on engine and hydraulic oil cooler 72
5.15 Change the oil in the vibrator shaft housing 73
5.16 Checking the central screw of the drive hub 75
To Next Page
Loading...