Bomag BMP 8500 - Switching off of Radio Remote Control in Case of Radio Interferences; Switching ECO-Mode on and off; Resetting the Control after Switching off by Radio Interference; Input of Code Numbers

Operation
BOMAG50 BMP 8500
4.13 Switching off of the radio re-
mote control in case of ra-
dio interferences
The radio remote control is automatically switched
off whenever the radio connection to the receiver
is interrupted or disturbed for more than 2 sec-
onds.
Resetting the control after switching
off by radio interference
l Step into the radio transmission range of the
machine.
Fig. 78
l Switch on the ignition (Fig. 78) and restart the
machine.
Operation can be resumed.
4.14 Switching ECO-mode on
and off
Input of code numbers
!
Caution
The code can only be entered when the engine
is shut down.
Fig. 79
l Switch on the ignition (Fig. 79).
l Open the flap in the rear hood.
Fig. 80
l Keep both function keys F
1
und F
2
(Fig. 80) in
the display module depressed for two sec-
onds.
The display shows "0000", whereby the first digit is
flashing.
l The value of the flashing digit can be in-
creased by pressing the function key F
1
.
h
720163
F 1
F 2