EasyManua.ls Logo

Bomag BMP 8500 - Switching off the Transmitter; Long Distance Shut-Down; Work Function

Bomag BMP 8500
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
BOMAG 45BMP 8500
Long distance shut-down
Fig. 64
If the distance (Fig. 64) between and transmitter
and receiver exceeds 30 m, the machine will stop.
i
Note
To continue travelling reduce the distance and re-
start the machine.
Work function
! Danger
Life hazard!
Move the machine only when it is directly in
sight.
The functions of operating elements and con-
trols are identical with the ones for the cable
remote control (see previous description).
Fig. 65
i
Note
If the battery voltage drops down to a too low level
during operation (power pack discharged), the red
warning light on the control (Fig. 65) will light up
approx. 10 minutes before the engine is shut
down. The warning buzzer starts to sound approx.
1 minute before the shut down
Drive the machine to a safe place as soon as pos-
sible, so that it will not stop all of a sudden.
If necessary switch over to operation with cable re-
mote control and plug the spiral cable into the re-
mote control. During cable operation of the
machine the power pack is automatically charged.
Replace or recharge the power pack.
Switching off the transmitter (engine)
!
Caution
Do not shut the engine down all of a sudden
from full load, but let it idle for a while in posi-
tion "Min" for temperature equalization.
If the radio remote control is not going to be
used for a longer period of time we strictly rec-
ommend to take the batteries out of the trans-
mitter and to recharge them approx. every four
weeks. This avoids complete discharging and
prolongs the lifetime of the power packs.

Table of Contents