Trouble shooting
BOMAG96 BMP 8500
6.1 General notes
The following work must only be carried out by
qualified and trained personnel or by the
BOMAG sales service.
Please observe strictly the safety regulations
in chapter 2 of these operating and mainte-
nance instructions.
Malfunctions are frequently caused by incorrect
operation of the machine or insufficient mainte-
nance. Whenever a fault occurs you should there-
fore thoroughly read these instruction on correct
operation and maintenance. If you cannot locate
the cause of a fault or rectify it yourself by following
the trouble shooting chart, you should contact the
service departments at our branch offices or deal-
ers.
On the following pages you will find a selection of
fault remedies. It goes without saying that not all
possible reasons for faults could be listed.
Danger of injury!
Do not touch rotating parts of the engine.
To Next Page
Loading...