Bomag BMP 8500 - Change the Fuel Lines; Checking the Injection Pressure

Every 2000 operating hours
BOMAG86 BMP 8500
5.25 Change the fuel lines
i
Note
For safety reasons this work should be performed
every two years.
Hoses consist of rubber or plastic material and age
over the course of time.
!
Danger
Fire hazard!
When working on the fuel system do not use
open fire, do not smoke and do not spill any fu-
el.
Do not inhale any fuel fumes.
Environment
Catch running out fuel, do not let it seep into
the ground.
Fig. 131 084
l Replace all fuel hoses (Fig. 131) including
their hose clips.
5.26 Checking the injection pres-
sure
i
Note
This work must only be performed by authorized
service personnel.