Maintenance
BOMAG 59BMP 8500
Do not mix different coolants and additives of
any other kind.
Do not use any radiator cleaning agent after the
anti-freeze agent has been mixed in. The anti-
freeze agent also contains a corrosion protection
agent. If this mixes with cleaning agent it may
cause the development of sludge, which could
damage the cooling system.
Anti-freeze concentration
50% = -37 °C
Coolant must be disposed of environmentally.
Mineral oil based hydraulic oil
The hydraulic system is operated with hydraulic oil
HV 46 (ISO) with a kinematic Viskosität von 46
mm
2
/s bei 40 °C und 8 mm
2
/s bei 100 °C betrie-
ben. For topping up or for oil changes use only
high-quality hydraulic oil, type HVLP according to
DIN 51524, part 3, or hydraulic oils type HV ac-
cording to ISO 6743/3. The viscosity index (VI)
should be at least 150 (observe information of
manufacturer).
Bio-degradable hydraulic oil
The hydraulic system can also be operated with a
synthetic ester based biodegradable hydraulic oil.
The biologically quickly degradable hydraulic oil
Panolin HLP Synth.46 meets all demands of a
mineral oil based hydraulic oil according to
DIN 51524.
In hydraulic systems filled with Panolin HLP
Synth.46 always use the same oil to top up.
When changing from mineral oil based hydraulic
oil to an ester based biologically degradable oil,
you should consult the lubrication oil service of the
oil manufacturer for details.
Check the filter more frequently after this
change.
Perform regular oil analyses for content of wa-
ter and mineral oil.
Replace the hydraulic oil filter element every
500 operating hours.
To Next Page