Every 1000 operating hours
BOMAG82 BMP 8500
5.22 Safety field measurement of
the Boss safety system
Danger of injury!
The safety field of the machine must be meas-
ured at a height fo one meter, also after main-
tenance/repair work on the safety system.
A safety field length < 1.20 m is not permitted.
Fig. 122
l Step behind the machine with the remote con-
trol and allow the machine to move towards
you, until it stops.
l Measure the distance between machine and
remote control housing.
Nominal value:
>1.20 m
Danger of injury!
If the safety distance is fallen short of stop the
machine and have the safety system repaired.
It is not permitted to continue operation.
l Repeat this inspection in front of the machine.
To Next Page
Loading...