Maintenance
BOMAG 63BMP 8500
5.24
Change the coolant X
5.25
Changing the fuel lines X
5.26
Check the injection pressure X
5.27
Check the fuel injection pump X
5.28
Check the fuel injection timing X
5.29
Check, clean, change the combustion
air filter
min. 1x per year X
5.30
Adjust the scrapers X
5.31
Tightening torques X
5.32
Engine conservation X
* Running-in instructions: Oil change after 50 and 250 operating hours, then every 250 operating hours When using fuels with a sul-
phur content higher than 0.5% the oil change intervals must be halved.
** Running-in instructions: check tightening torque after 50 and 250 operating hours, then every 250 operating hours
*** Also in case of repair in the hydraulic system.
No. Maintenance work Comment
every 10 operating hours, daily
every 250 oper. hours
every 500 oper. hours
every 1000 oper. hours
every 2000 oper. hours
every 3000 oper. hours
as required
To Next Page
Loading...