Borri B8031 - UPS Test Procedures and Settings; UPS Language Selection and Test Initiation; Battery Test and History Reset Procedures

Front panel
22 of 29
JUD408312 Rev.B JSE410920 22/07/08
3.5.3 UPS Language
< SELECT LANGUAGE >
2 – ENGLISH
The language can be modified
with the key or and they are
confirmed by pressing .
Pressing the key leads to
the special menu (see 3.5).
3.5.4 UPS Test
< UPS TEST >
PRESS RESET
FOR COMMUTATION
Pressing the key causes
the commutation to bypass.
Pressing the key leads to the
special menu (see 3.5).
3.5.5 Battery test
The BATTERY TEST cannot be started if this option is not enabled.
< BATTERY TEST >
PRESS RESET
TO START TEST
Pressing the key the
battery test is started. Pressing
the key leads to the special
menu (see 3.5).
WARNING - POSSIBLE LOSS OF LOAD!
This test can affect the continuity of supply to the loads, if the battery is not fully
charged.
3.5.6 Reset history
< RESET HISTORY >
PRESS RESET
TO CLEAR HISTORY
Pressing the key the
alarms history is cleared.
Pressing the key leads to the
special menu (see 3.5).
WARNING
This operation causes the cancellation of the events stored in the history memory.