Safety Instructions
1–7
1070 073 822-104 (02.06) GB
1.6 Documentation, software release and trademarks
Documentation
The present manual provides the user with comprehensive information
about operation and configuration of the IPC / IPC300 Industrial PC.
Overview of available documentation Part no.
German English
IPC, IPC300 Connectivity Manual 1070 073 812 1070 073 822
BF2xxT / BF3xxT Control Panel
Connectivity Manual
1070 073 814 1070 073 824
. In this manual the floppy disk drive always uses drive letter A:, and the
hard disk drive always uses drive letter C:.
Special keys or key combinations are shown enclosed in pointed brackets:
D Named keys: e.g., <Enter>, <PgUp>, <Del>
D Key combinations (pressed simultaneously): e.g., <Ctrl> + <PgUp>
Release
Information on the software version for Windows95 or WindowsNT can be
obtained by:
1. Clicking with the right mouse button on the “My Computer” icon
(”Workplace”) on the desktop
2. Select “Properties” menu option
Trademarks
All trademarks referring to software that is installed on Bosch Rexroth prod-
ucts when shipped from the factory represent the property of their respective
owners.
At the time of shipment from the factory, all installed software is protected by
copyright. Software may therefore be duplicated only with the prior per-
mission of the respective manufacturer or copyright owner.
MS-DOSr and Windowst are registered trademarks of Microsoft Corpor-
ation.
PROFIBUSr
is a registered trademark of the PROFIBUS Nutzerorganisa-
tion e.V. (user organization).
To Next Page
Loading...
