Installation
4–1
1070 073 822-104 (02.06) GB
4 Installation
When installing the Bosch IPC / IPC300, refer to the information on stan-
dards compatibility and operating conditions in Sections 2.6 and 2.5.
CAUTION
Conditions hazardous to the product!
The ambient air must be free of electrically conductive pollutants
(e.g., acids, alkali, corrosives, salts, metallic vapours, etc.).
Air intake and exhaust filters must be serviced in regular intervals.
DANGER
The operational reliability of components designed to be installed in
housings or control cabinets will be severely impeded if they are
used or operated without having first been installed.
Therefore, do not use or operate the IPC until it has been installed.
. Note
D The use of silicon-based sealing compounds, adhesives and insu-
lating agents is prohibited.
D Ensure that the installation is maintenance-friendly, i.e., that it
provides unrestricted access to connections, cables and fuses.
D Precede all installation procedures by writing down the information
on equipment rating plates. In the event that rating plates are
hidden from view as a result of the installation, you will still have
quick access to this information whenever required.
To Next Page
Loading...
