Bosch Access Easy Controller 2.1 - Page 16

16 en | System Layout Access Easy Controller 2.1
2018.11 | 1.0.6 | F.01U.122.796 Hardware Installation Manual Robert Bosch (SEA) Pte Ltd
Number of Monitoring Points : 8* 8
Number of Output Control
Relays
: 8** 8
Notice!
* Input Monitoring Points on the 4-Reader board consist of door contact input and request-to-
exit inputs associated with reader-controlled doors.
** Output Control Relays on the 4-Reader board are the door strike/magnetic lock control
relays for the reader-controlled doors.
Readers Supported by AEC2.1
Standard Wiegand I/P Reader : HID MiniProx Reader, HID ProxPoint Reader, HID ProxPro
with/without Keypad Reader, HID iCLASS with/without
keypad Reader (R10, R30, R40)
Additonal Requirements for
the Following Readers
: ARD-AYCF64, ARD-AYCE65B
– Single key
– 8-bit Wiegand
– Nibbles complemented
ARD-RK40AMC01
– 4-bit Wiegand
Ports
LAN Ports : Two RJ45
Serial Ports : Two RS232
Extension Ports : One RS485
AEC2.1 Capacity
Number of Concurrent Logins: 8
User Licenses : Max. 25 user account (including “superuser”), using up to
50 characters, alphanumeric, case sensitive user IDs and
passwords
Database Integrity : Encryption used for user IDs and PINs
Number of Cards Supported : 20,480
Number of Access Groups : 254
Number of Time Schedules : 255
Interval per Time Schedules : Four intervals per day, plus holidays support
Recommended Web Browser : Microsoft Internet Explorer version 7.0 or above
4-Reader board 8-IO board
Max. Number of Interface
Board Supported in a Full
AEC2.1 Configuration
: 8 8