Bosch Access Easy Controller 2.1 User Manual

Access Easy Controller 2.1 How to Set Up the Access Easy Controller 2.1 and the Computer | en 77
Robert Bosch (SEA) Pte Ltd Hardware Installation Manual 2018.11 | 1.0.6 | F.01U.122.796
13. Proceed to login using the default user id: user1 and password: 8088. Select the required
GUI language from the language dropdown. Upon successful login, the controller's home
page is displayed as shown below.
Notice!
Changing the language in the login page changes the GUI language interface and not the
database.
14. From the home page, select System > Network Settings. The Network Settings page
appears. Make the required changes to configure the controller for operation on the
customer's network. Click the save button to store the changes. Refer to the
software manual for more information. The screen below shows an example of the
settings made.

Bosch Access Easy Controller 2.1 Specifications

General

Brand	Bosch
Model	Access Easy Controller 2.1
Category	Controller
Language	English