Bosch COOKIT MCC9555FWC - Inserting the 3 D Stirrer; Inserting the Twin Whisk

Tools and accessories en
101
2. Hold the universal knife by the tool
handle and remove the blade
guard by pulling down from the
handle.
3. Grip the universal knife by the tool
handle and place on the tool
holder.
a The tool will noticeably engage.
4. Close and lock the lid.
6.2 Inserting the 3D stirrer
1. Place the stirrer on the tool holder.
a The tool will noticeably engage.
2. Close and lock the lid.
6.3 Inserting the twin whisk
Note:When processing food, the
twin whisk can squeak. This is nor-
mal and does not impair functioning
of the appliance. Clean the twin
whisk after use.
→"Cleaning the twin whisk",
Page122
1. Place the twin whisk on the tool
holder.
a The tool will noticeably engage.
2. Close and lock the lid.