Bosch COOKIT MCC9555FWC - Connecting Appliance to the WLAN Home Network (Wi-Fi); Data Protection; Home Connect; Home Connect Settings

HomeConnect en
115
17.1 Connecting appliance to
the WLAN home network
(Wi-Fi)
▶
Refer to the Home Connect docu-
ments supplied for more informa-
tion.
17.2 HomeConnect settings
Adapt HomeConnect to your needs.
You can find the HomeConnect set-
tings in the basic settings for your ap-
pliance. Which settings the display
shows will depend on whether
HomeConnect has been set up and
whether the appliance is connected
to your home network.
Overview of the HomeConnect settings
Here you can find an overview of the HomeConnect settings and network set-
tings.
Basic setting Selection Description
User settings HomeConnect on
HomeConnect off
Switch off the wireless module with
prolonged absence or to save energy.
Note:In networked standby mode
your appliance requires max. 2 W.
Disconnect from
network
- Note:You cannot operate your appli-
ance via the HomeConnect app
without a network connection.
Connect to net-
work
Manual connec-
tion
Automatic connec-
tion
Reconnect the appliance to your
home network.
Connect to app - Connect the appliance to the
HomeConnect app or additional
HomeConnect accounts.
17.3 Remote diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the HomeCon-
nect server and if Remote Dia-
gnostics is available in the country in
which you are using the appliance.
Tip:For further information and de-
tails about the availability of Remote
Diagnostics in your country, please
visit the service/support section of
your local website: www.home-con-
nect.com
17.4 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your