en Automatic programmes
108
4. To deselect the selected features,
press "Reset".
a The display shows recipes with the
selected features.
10.3 Preparing a recipe
Requirements
¡ A Guided Cooking recipe or an
automatic programme is selected.
→"Selecting recipes", Page107
→"Using automatic programmes",
Page108
¡ The ingredients are ready for pro-
cessing.
1. Follow the safety instructions.
→Page83
2. Follow the instructions on the dis-
play.
3. To start operation, press "Start".
4. To interrupt operation, press
"Pause".
5. To end the recipe, press "Done".
Note:If setting values are given for
ovens in a Guided Cooking recipe,
these values refer to Bosch ovens. If
you use a different oven, follow the
manufacturer's instructions.
Tips
¡ You can keep selected dishes
warm for up to 30 minutes by
pressing "Keeping warm".
¡ To see the next steps during pre-
paration, press . To exit the re-
cipe preview, press .
Automatic programmes
11 Automatic pro-
grammes
Automatic programmes
Automatic programmes help you with
cooking. These programmes help
you make a simple dish in just a few
steps.
11.1 Using automatic pro-
grammes
1. Switch the appliance on with .
2. Press "Automatic programmes".
3. Select the required automatic pro-
gramme.
4. Press "Cooking".
→"Preparing a recipe", Page108
11.2 Overview of automatic programmes
You can find an overview of the automatic programmes here.
Note:Follow the recommended settings on the display.
Category Automatic pro-
gramme
Use Tool
Dough &
pastry
Dough pro-
gramme 1: Firm
dough
Mix ingredients. This auto-
matic programme is espe-
cially suitable for heavy dough
with a low water content, e.g.
bread, pizza, pasta, strudel
and shortcrust pastry.