Bosch D1260 - Turning the System on (Arming) with a Duress

Part II: System Commands
Turning On the System (Arming) With a Duress Passcode
D1260 Owner’s Manual
© 2003 Bosch Security Systems 50410C
Turning On the System (Arming) With a Duress Passcode
Your passcode may have a special duress feature that is simply your personal passcode with its last digit increased by 1 or
2.
If an intruder demands that you arm or disarm the security system, you can use your duress passcode. The duress
passcode arms or disarms the system and sends an alarm report to your security company. There is no alarm tone or
visual indication at the premises that the report is sent. Check with your security company before attempting to use this
feature.