Bosch D1260 - Silence the Trouble Sounder & Clear Trouble Display

Part II: System Commands
Silence the Trouble Sounder & Clear Trouble Display (COMMAND + 4)
D1260 Owner’s Manual
© 2003 Bosch Security Systems 50410C
Silence the Trouble Sounder & Clear Trouble Display (COMMAND + 4)
Description
Use COMMAND 4 to silence the trouble sounder during system events. This command also clears system messages from
the display. If an alarm has occurred and was silenced, the *ALARM SILENCED* display will continue to scroll to remind
you that cleared events can be seen with the View Memory function (see View Memory ?).
Using COMMAND 4:
1.
Press the COMMAND key.
The display shows *System Command*.
2.
Press the 4 key.
3. The Command Center sounder is silenced.