Part II: System Commands
Turning On the System (Arming) With Doors or Windows Open
D1260 Owner’s Manual
© 2003 Bosch Security Systems 50410C
7. Once the last faulted
point is displayed,
pressing the Next>
soft key will start
displaying a
summary and then
specifics of any
bypassed points.
8. Once the last bypassed point is displayed, the display will change to show the soft key to either
force arm the faulted points (Force Arm>) or force arm the faulted/bypassed points (Force/Bypass
Arm>).
9.
Press the appropriate soft key to arm your system with the faulted/bypassed points removed from
service.
To Next Page
Loading...
