Part II: System Commands
WATCH MODE ? (COMMAND + 6)
D1260 Owner’s Manual
50410C © 2003 Bosch Security Systems
Exiting Watch Mode:
1. Ensure your command center shows idle disarmed
text.
2.
Press the COMMAND key.
3. The display shows *System Command*.
4.
Press the 6 key.
Note: If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
Press the Menu> soft key to enter the Command Menu,
then press Next> soft key repeatedly
until you reach the WATCH MODE ?> prompt then press the
adjacent soft key.
5. The display briefly shows Watch Mode is now off
before returning to idle disarmed text
To Next Page
Loading...
