Part III: Advanced Commands
CHANGE TIME/DATE (COMMAND + 4 + 5)
D1260 Owner’s Manual
50410C © 2003 Bosch Security Systems
6. The display shows Enter new date:
See Step 9 for use of the Time/Date Display> soft key.
If you input the wrong date, press the <Exit soft key to
clear the time.
Enter the new date using a MM/DD/YY format.
Ex: If the desired time is January 1, 2002,
press 0 + 1 + 0 + 1 + 0 + 2
7.
Press the Enter> soft key or the [ENTER] button.
8. The Time/Date Display> soft key is used to show how
the time and date entered will look.
9. The new time and/or date is displayed for 20 seconds
before the display returns to idle text.
Press the <Exit soft key to return to idle text.
To Next Page
Loading...
