Part III: Advanced Commands
ADD/CHANGE USER (COMMAND + 5 + 6)
D1260 Owner’s Manual
© 2003 Bosch Security Systems 50410C
6. If the card is accepted,
the display changes to
either Card added. or
Card changed if the
card already exists in
your system.
Pressing the <Exit soft key exits out of this function and returns the display to the main Add /
Change User display.
Pressing the Next> soft key exits out of this function
and returns the display to Add/Change Passcode
depending on if a passcode already exists for the user.
To Next Page
Loading...
