Bosch GTS15-10 - Specifications; Cutting Capacities

-9-
Specifications
Voltage: 120V~ 60 Hz
Amperage: 15A
No load speed: 3800/min (RPM)
Blade diameter: ⌀ 10″ (254 mm)
GTS15-10 Table Saw
Cutting Capacities
Rip cut right - silver pins: 0″ - 25-1/2″ (0 mm - 647.7 mm)
Maximum rip cut right - black pins: 7″- 32-1/8″ (177.8 mm - 819.2 mm)
Maximum rip cut left: 14-1/8″ (358.8 mm)
Depth of cut at 90°: 3-9/16″ (90.5 mm)
Depth of cut at 45°: 2-1/2″ (63.5 mm)
Factory set bevel range: 0° / 45°
Bevel range without stops: -2° / 47°
Dado blade diameters: 8″ (203 mm) and 6″ (152 mm)
Maximum dado stack width: 13/16″ (20.6 mm)
1609B07947_GTS15-10_Table_Saw_OSI_20230420.indd 91609B07947_GTS15-10_Table_Saw_OSI_20230420.indd 9 4/20/2023 11:23:01 AM4/20/2023 11:23:01 AM