Bosch MPC-C Series User Manual

12 en | All functions at a glance Panel Controller
2017.09 | 7.0 | F.01U.258.929 User Guide Bosch Sicherheitssysteme GmbH
3 All functions at a glance
3.1 Calling up the start menu
Press the "home" key to return to the start menu from any submenu.
Notice!
The display changes from each menu element to the standby display if no entries are made
within one minute; see also Standby display.
3.2 Bypass/Isolate
3.2.1 Bypass
Bypass
Block
-> Bypass -> Show bypassed
devices
Select by
number
Bypass buzzer Printer
Block NAC Transmission
device
HVAC Doorholder
Detector Logical zone Extinguishing
system
Annunciator
Bypass group More... -> Control element Interface
module
Show bypassed devices
– Display of a list of all bypassed elements:
– Un-bypassing the bypassed elements.
Select by number
– Display of a list of all bypassed elements:
– Search for an element in a list by entering the number.
– Un-bypassing or bypassing an element.
3.2.2 Isolate
Bypass
Block
-> Bypass Show blocked devices Select by
number
Block Group Printer
Block -> Sounder Strobe HVAC Doorholder
Transmission device Detector Extinguishing
system
Annunciator
Logical zone More... -> Control
element
Interface
module
Show blocked devices
– Display a list of all isolated elements
– De-isolate isolated elements
Select by number
– Display a list of all elements that can be isolated
– Search for an element in a list by entering the number

Bosch MPC-C Series Specifications

General

Brand	Bosch
Model	MPC-C Series
Category	Control Panel
Language	English