Bosch MPC-C Series - Displaying Additional Information

Panel Controller Alarm | en 45
Bosch Sicherheitssysteme GmbH User Guide 2017.09 | 7.0 | F.01U.258.929
Message number
For information on the message number (#002), see Information about logical zones in the alarm
state, page 43.
Depending on the configuration, additional information is displayed in the second line, such as
the installation location of the detector or the detector type.
To display more information about an alarm message, see Displaying additional information,
page 45.
9.4.8 Displaying additional information
Notice!
By way of example, an action text can be entered for every detector type in the FSP-5000-RPS
programming software.
To display further information about the individual detectors, select the alarm message you
require.
The following information is displayed:
– Element category
– Message type
– Date and time of the message
– Physical and logical addressing of the detector
– Only for LSN detectors: specification of the detector type
– Action text (depending on the configuration)