Panel Controller All functions at a glance | en 15
Bosch Sicherheitssysteme GmbH User Guide 2017.09 | 7.0 | F.01U.258.929
– Key deposit
– Battery
– Mains power
When the walktest is complete, the following selection options are available:
– Adding the elements to be tested to a different walk test group (Assign tested elements
to walktest group).
– Continuing the walk test (No).
– Displaying tested or non-tested elements (Not tested, Tested).
Create / Change walktest group
– Deleting or adding individual elements to specified walktest groups.
– Delete all elements in a walktest group.
3.4.2 Change language
Change the language of the displays (Change language).
3.4.3 Activate Outputs
Activate outputs:
– Select by number:
Display of a list of all controllable elements.
Search for an element in a list by entering the number.
– Sounder
– Strobe
– HVAC
– More...
Start and terminate activation of the selected elements.
3.4.4 Activate the transmission device
Activate a selected transmission device (Activate transmission device).
3.4.5 Detector removal
Bypass all sounders and transmission devices for 15 minutes while a detector is being
removed (Remove detector).
3.4.6 History Log
– Filtering and displaying specific data
– Combining various filters
– Print out all filtered data or a specific part of the data
The following filters are available:
Filter Data, filtered by...
Without filter All data
Show all Delete filter Display all data with specification of event number, date,
time, element number and message type. Existing filters are
deleted.
Period Starting date, end date and time
Event types Message types, such as Fault
Device types Device types, such as Detectors
Address range Address range within a system
To Next Page
Loading...
Need help?
General
