Mode assigned
and marked
The selected element has already been assigned
a particular mode. It is selected in order to
reset it to the original mode; a bypassed
element is unbypassed, for example.
In reset mode The resetting of the element is not yet
complete.
"Bypass" menu
In the Bypass menu, list fields can display additional information; see the following table:
List field In the Bypass menu
Display a bypass group that consists of several elements.
In order to display a list of all elements of the bypass group,
press the right-hand field.
5.7.3 Selecting element/function
To select elements/functions from a list, touch one or more list fields on the touch screen with
your finger.
In order to scroll forward or backward, select the up arrow (back) or the down arrow
(forward):
To scroll quickly using the scrollbar, select the "double arrow" key on the membrane keypad.
The activated list field is marked.
To search for and display a particular element; see Search Function/Element, page 29.
5.7.4 Assigning mode
A mode like Bypassed, Walktest etc. can be assigned to selected elements.
To assign a mode to selected elements, select the corresponding function field.
In the following example, a detector is assigned bypassed mode in the Bypass Block menu:
1. Select the list fields you require from the list.
The list fields are marked.
2. Select the Bypass function field.
The detectors are bypassed. The list fields are highlighted in a dark color.
The sand glass icon indicates an entry that is still being processed by the system.
Notice!
In the Bypass submenu, the function fields have an additional selection option; see Displaying
and un-bypassing bypassed element groups, page 57.
To Next Page
Loading...
Need help?
General
