Panel Controller In overview | en 23
Bosch Sicherheitssysteme GmbH User Guide 2017.09 | 7.0 | F.01U.258.929
Status bar
0
Fire
0
Control
8
Trouble
0
Bypass Status
This status bar is available on each menu. In addition, other status bars are offered in some
menus; see also Switching between status bars, page 31:
The leading number specifies the number of elements in the respective state:
Fire Number of groups that have triggered a fire alarm
Control Elements that are activated
Trouble Elements that have reported a fault
Bypass Bypassed or isolated elements
In addition it is possible to display an overview of the type and nature of all message types
received by the panel:
Status Display of a list of the various message and status types and the
number of elements in the respective state
To display the individual elements, touch the relevant field with your finger.
The Control and Trouble status fields are identified by the letters "B" and/or "C":
– "B" means that controllers for type B fire safety equipment (G-B) are affected (e.g.
control elements without acknowledgement).
– "C" means that controllers for type C fire safety equipment (G-C) are affected (e.g.
extinguishing systems).
4.4 Display support information
To display the address of the company providing the support, please press:
Notice!
Information concerning support is only displayed if the information has already been entered
in FSP‑5000‑RPS.
To Next Page
Loading...
Need help?
General
