36/83 ctrlX SAFETY | Commissioning
R911405651, Bosch Rexroth AG, DOK-XSAFE*-SAFEX-C.1XC-IT03-EN-P, Edition 03
Fig. 9: Reset function 3: Time-based function > Reset of the output state, response if the limit is
crossed again.
NOT
With time-based functions, e.g. time-based monitoring of complementary input signals,
the output state is reset and a defined error state is only detected if the (time-based)
limit value is exceeded again.
In order to protect against incorrect use, e.g. repeated triggering of the reset function to
circumvent an alarm state, application-based measures may have to be taken in the
AWL programming.
To Next Page
Loading...
