Bosch Rexroth ctrlX SAFETY SAFEX-C.15 - Ethernet 2 Interface

ctrlX SAFETY | Device type SAFEX-C.15 69/83
DOK-XSAFE*-SAFEX-C.1XC-IT03-EN-P, Edition 03, Bosch Rexroth AG
10.3.2 Ethernet 2 interface:
EtherCAT
(see Tabelle 62: and Tabelle 63:)
Profinet
Tabelle 64: LED Ethernet LINK / LAN
LINK / LAN Color Flashing pattern Meaning
- Off No connection
Green Permanently illuminated A connection to the network
is available
Yellow Permanently illuminated A connection to the network
is available with telegram
traffic (PROFINET
communication is active)
Tabelle 65: Profinet Diagnostics
PROFINET
Status
Color Flashing pattern Meaning
- Off The device does not have a
valid IP address or is
switched off.
Green Flashing The device has booted up
with a valid IP address, but
does not have a cyclic
connection.
Green Permanently illuminated The I/O connection is
established without errors.
Red Flashing The existing I/O connection
was terminated unexpectedly
(e.g. Watchdog).
Red Permanently illuminated A “Duplicate-IP-Address-
Check” detected that the
configured IP address
already exists in the network.
Red-green Flashing The device is in the start-up
phase and performs a self-
test.