78/83 ctrlX SAFETY | Causes and correction of errors
R911405651, Bosch Rexroth AG, DOK-XSAFE*-SAFEX-C.1XC-IT03-EN-P, Edition 03
14 Causes and correction of errors
If the device does not work properly, it automatically switches to the safe state and indicates
the fault state via LED.
Please first check the displayed error code using the error list of ctrlX SAFETY (Error list and
diagnostic messages)
If it is not possible to eliminate the faulty condition, please contact the manufacturer
immediately.
More detailed information on the causes of errors and how to fix them can be found
in the document “Error list / Diagnostic messages for ctrlX SAFETY SAFEX-C.1*
devices DOK-XSAFE*-SAFEX-C.1XC-RExx-DE-P.
To Next Page
Loading...
