Bosch Rexroth ctrlX SAFETY SAFEX-C.15 - Page 50

50/83 ctrlX SAFETY | Device type SAFEX-C.12
R911405651, Bosch Rexroth AG, DOK-XSAFE*-SAFEX-C.1XC-IT03-EN-P, Edition 03
Tabelle 33: LED device diagnostics (Lightpipe, PF01)
PF01 Start-up phase,
Device status
Color Flashing
pattern
Meaning
- - Off No voltage supply
Init,
Self-test,
Stop,
BusInit
Yellow Flashing The controller is in the startup
phase or STOP or a
program/firmware download is
being performed.
RunIntern Yellow Permanently
illuminated
Local operation of the device
as FSoE master (FSoE slave
user not yet in Run)
Run Green Flashing The controller is functioning
correctly; the application is
running, but has not (yet) been
validated.
Run Green Permanently
illuminated
The controller is functioning
correctly; the application is
running and validated.
Alarm Red Flashing Alarm (application error) - the
device is in a safe operating
state. Error status and safety
program can be reset.
1)
Error Red Permanently
illuminated
Fatal error - the device is in a
safe operating state. The error
state can only be reset via
POR.
1) You can find a description of an alarm reset in the “Programming manual for ctrlX SAFETY SAFEX-C.1* devices with
ctrlX SAFETY Engineering DOK-XSAFE*-SAFEX-C.1XC-PRxx-DE-P