32/60 Bosch Rexroth AG | Electric Drives and Controls LTH | 3 609 929 408/2.1
Contents
1 Safety Instructions 33
1.1 General 33
1.2 Instructions for Correct Usage 33
1.3 Qualified Personnel 33
1.4 Safety Warnings in this Technical Information 33
1.5 Safety Warnings on the Equipment Components 34
2 Power Unit LTH 35
2.1 Technical Data 35
2.2 System Description 37
2.3 Block Diagram 38
2.4 Hardware Description 39
2.4.1 Power Line Input Module 39
2.4.2 Power Line Filter 39
2.4.3 Isolation Transformer 39
2.4.4 Voltage Supply Module 39
2.4.5 Output Stage 40
2.4.6 Control Module 40
2.5 Installation 40
2.6 Connection and Start-Up 41
2.6.1 Connecting an EC power tool and an external
control (e.g. SE 200) 42
2.6.2 Connecting an EC power tool to a power unit
with a current device 43
2.7 Front Panel 44
2.7.1 View 44
2.7.2 LED-Displays 45
2.8 Location of Plugs on Lower Side 46
2.9 Operation 47
2.9.1 Switch for Motor Selection 47
2.9.2 Switch for Internal/External Program Selection 47
2.9.3 Program Selector Switch 47
2.9.4 NIO Acknowledgement 48
2.9.5 IO Sums Counter 48
2.9.5.1 Operating the counter 49
2.9.5.2 Setting the Operating Mode and Operational
Parameters 49
2.9.5.3 Function Chart 50
2.9.5.4 Parameter explanation 50
2.9.6 Error Acknowledgement 51
2.10 Interface Description 52
2.10.1 Power Line (X1) 52
2.10.2 Sensors SE200 (X2) 52
2.10.3 Hand-Held Power Tool (X3) 53
2.10.4 Stock Control SE200 (X7) 54
2.10.5 Command Line SE200 (X8) 55
2.10.6 Current Control (X10), Option 56
2.10.7 Stock Control (X11), Option 57
2.10.8 User Interface (X13) 57
3 Overview of Order Numbers for Smart Tools
and Accessories 58
3.1 Hand-Held Power Tools 58
3.2 Power Unxits 58
3.3 Controls and Accessories 58
3.4 Connection Cables for Hand-Held Power Tools 58
3.5 Connection Cables for LTH/SE 200 58
4 Complaints and repairs 59
5 Guarantee 59
6 Service 59
7 Sales 59
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
