Bosch Rexroth LTH - Order Numbers and Accessories; Hand-Held Power Tools; Power Units; Controls and Accessories

58/60 Bosch Rexroth AG | Electric Drives and Controls LTH | 3 609 929 408/2.1
3 Overview of Order Numbers for Smart Tools and Accessories
3 Overview of Order Numbers for Smart Tools
and Accessories
3.1 Hand-Held Power Tools
3.2 Power Unxits
3.3 Controls and Accessories
3.4 Connection Cables for Hand-Held Power Tools
Set of straight cables
Set of cables in spiral version
3.5 Connection Cables for LTH/SE 200
Designation Order No.
ECM16-MG/A 0 608 841 014
ECM16-MG/B 0 608 841 013
ECH12-MG 0 608 841 015
ECH28-MG 0 608 841 007
ECH37-MG 0 608 841 009
ECH57-MG 0 608 841 011
Table 11:
Designation Order No.
LTH 230V 0 608 750 056
LTH 110V 0 608 750 064
Table 12:
Designation Order No.
Current control ST1 0 608 750 054
Programming module PM-1 0 608 750 055
Calibration module KM-1 0 608 750 072
Connection cable (PM/ST) 0 608 750 046
Power tool control SE 200 0 608 830 123
Operating program SEPR 0 608 830 115
Table 13:
Length Order No.
1.6 m 0 608 750 065
2.5 m 0 608 750 066
4.0 m 0 608 750 067
6.3 m 0 608 750 068
10.0 m 0 608 750 069
Table 14:
Length Order No.
6.3 m 0 608 750 070
10.0 m 0 608 750 071
Table 15:
Designation Order No.
Set 0 608 750 061
Table 16:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com