Bosch Rexroth Rho 4.0 - 4.4 Operation of the PCLrho4.0 with INTERBUS-S

Electric Drives
and Controls
4−13Bosch Rexroth AGRhoMotion1070072367 / 04
PCLrho4.0
4.4 Operation of the PCLrho4.0 with INTERBUS-S
When using a PCI_BM-IBS component for the operation of the
PCLrho4.0 with INTERBUS-S, there is the following possibility for the I/O
configuration:
D Physical addressing of the inputs and outputs, i.e. all connected I/O
components are addressed in a free increasing order.
. A data exchange is limited to the inputs I0 to I511 and the outputs
O0 to O511. Higher addresses cannot be used