Code Name Setting range Default Min. Attri.
F4.20 p/Q command soft start delay 0.0...1,000.0 s 0.0 0.1 Stop
F4.23 Minimum flow command limit 0...[F4.24] rpm 200 1 Stop
F4.24 Maximum flow command limit [F4.23]...5,000 rpm 3,000 1 Stop
Tab. 7-1: Parameter list of flow command processing
F2.08, F2.09: Scaling for flow command
Fig. 7-3: Flow command scaling
FcP 5020 Bosch Rexroth AG
Block Diagram of Main Functions
DOK-RCON03-FCP5020****-QU04-EN-P
21/83
To Next Page
Loading...
