6 Electric Connection
6.1 Overview
Fig. 6-1: Wiring Diagram
●
FcP 5020 I/O functionality is given higher priority over the stand-
ard EFC functions. The standard EFC functionality assigned to ter-
minal will be ignored and taken over by the ASF terminal assign-
ment (non-zero entries in ASF).
● For details about the wiring of temperature sensor, please refer to
EFC 5610 operating instructions (R912005854).
● Avoid connection between GND and COM for disturbance, for ex-
ample in Sytronix application HM20 pressure conductor should be
supplied by external 24V, and all digital I/O by internal 24V.
Bosch Rexroth AG
Electric Connection
FcP 5020
10/83
DOK-RCON03-FCP5020****-QU04-EN-P
To Next Page
Loading...
