7.8 Restore ASF Parameter
User can restore ASF parameter setting to default via F1.00, by doing this follow-
ing EFC parameters will be re-set to ASF default values as well. Please reference
chapter 8.6 "Auto-modified EFC Parameters in FcP Initialization" on page 74
for more details.
Additionally, if b0.10 is executed to restore EFC parameters, please make sure to
re-execute F1.00 = 1 to restore all ASF parameters to default values.
Fig. 7-11: ASF parameter restore to default
By restoring ASF parameter (setting F1.00 = 1), the value of parame-
ter F1.15 and F1.16 will NOT be restored. For CytroPac application,
after restoring ASF parameter (setting F1.00 = 1), parameter F1.20
need to set according to different type of CytroPac applications in
order to quickly configure setting of CytroPac.
FcP 5020 Bosch Rexroth AG
Block Diagram of Main Functions
DOK-RCON03-FCP5020****-QU04-EN-P
33/83
To Next Page
Loading...
