Bosch Rexroth Sytronix FcP 5020 - Page 73

Code Name Setting range Default Min. Attri.
F2.36 DO1 output 0: No function assigned from ASF
1: Converter warning
2: Green CytroPac flashing LED
3: Red CytroPac flashing LED
4: Oxygen too high (for myCro)
5: Pressure too low (for myCro)
1 - Run
F2.37 EDO output 0 - Run
F2.38 EDO2 output
0: No function assigned from ASF
1: Converter warning
2: Green CytroPac flashing LED
3: Red CytroPac flashing LED
4: Oxygen too high (for myCro)
5: Pressure too low (for myCro)
6: Degas/gas valve control (for my-
Cro)
0 - Run
F2.40 Relay 1 output 0: No function assigned from ASF
1: Converter warning
2: Two points / double pump control
0 - Run
F2.41 Extension relay output 0 - Run
Tab. 8-2: Parameter list of group F2
Analog output setting:
For example:
● F2.31=1: Pressure command
● F2.31 = 2: Pressure feedback
● F2.31 = 3: Setting speed
● F2.31 = 4: Output speed
FcP 5020
Bosch Rexroth AG
FcP 5020 Parameter List
DOK-RCON03-FCP5020****-QU04-EN-P
69/83