Page 6
BOSCHE Weighing Systems
Version 4.0
2024-03-27
1 | Safety Weighing Terminal EWI / MWI
1.1.2 Safety symbols in this manual
The following symbols are used on all important positions in this manual.
Particularly observe these notes and treat very careful.
1.2 Intended use
The Weighing Terminal EWI / MWI exclusively serves to display the weight in
combination with suitable load cells.
The load cells are intended for use as "non-automatic weighing instruments".
Any further use is considered as not in accordance with the intended use. The
manufacturer does not assume any liability for resulting damage.
The intended use also includes:
• Observance of all notes, information, instructions contained in the
documentation as well as in all supplied manuals issued by the
manufacturer.
• Adherence of the maintenance and service conditions and intervals
prescribed by the manufacturer and
• Observance of the technical data.
Adhere to the attendant accident prevention regulations as well as other
generally approved technical safety rules.
Danger
This note indicates danger of injuries and/or danger to life, if specific
behaviour rules are not observed.
When this symbol appears in the operating manual, please take all
required safety measures.
Attention
This note warns against damage to assets as well as financial disadvantages
and responsibility under criminal law (e.g. loss of the warranty, cases of third
party risks, etc.).
Note
Important notes and information about an efficient, economic and environ-
mental friendly handling are specified here.
Note
Always specify the serial number of your display for all questions, orders or
jobs. This will facilitate the communication with the manufacturer and prevents
error during editing your request.
To Next Page
Loading...