Page 18
BOSCHE Weighing Systems
Version 4.0
2024-03-27
3 | Transport, installation, connection Weighing Terminal EWI / MWI
3.3 Installation and connection
Keep the device clean and do not expose to an environment influencing the
display accuracy.
Install the unit using the table/wall bracket included in the scope of delivery
according to the installation instructions.
Note
Ensure that a 230 V AC voltage supply is available on the installation site
(unless operation with rechargeable batteries is intended).
Protect against draught!
Protect against heat,
sun and frost!
Protect against tilting a
and vibration!
Avoid astable
voltage sources!
Avoid humidity!Keep the unit clean
+5º ~ +40º
To Next Page
Loading...