Page 121
BOSCHE Weighing Systems
Version 4.0
2024-03-27
7 | Troubleshooting Weighing Terminal EWI / MWI
f any other malfunctions or error messages occur, please switch off the scales
and after a short while on again.
If error messages occur again, please contact the Bosche customer service.
7.3 Customer service contact data
Bosche GmbH & Co. KG
Reselager Rieden 3
49401 Damme
Fon +49 5491 999 689 0
Fax +49 5491 999 689 9
E-Mail info@bosche.eu
MEM.Err
Error when storing. Value has already been
stored.
First reset the scale to 0.0,
to be able to save further
values in the sum memory.
rn1.Err
Error when entering
the capacity for
multi-range and
multi-interval instru-
ments.
The specified capacity of the
range W1 is greater than the
capacity of the ranges W2 or
W3.
Adjust the values of the
ranges W1, W2, W3.
Values W1<W2<W3.
rn2.Err
Error when entering
the capacity for
multi-range and
multi-interval instru-
ments.
The specified capacity of the
range W2 is greater than the
capacity of the range W3.
Adjust the values of the
ranges W1, W2, W3.
Values W1<W2<W3.
Error
messages
Malfunction Cause possible Solution
To Next Page
Loading...