Version 4.0
2024-03-27
BOSCHE Weighing Systems
Page 25
Weighing Terminal EWI / MWI Operation | 4
4.4 Turn off
If you are in the menu, the scale is turned off without that any changes made
are stored.
In addition, a voltage tester is connected to indicate a low battery voltage by the
battery symbol. At too low battery voltage, the voltage tester ensures that the
display turns off itself to protect the battery.
4.5 Auto off
The indicator has an automatic shut off. The time of shutdown can be set
between 1 to 99 minutes. The automatic shut-off is active if no change in
weight on the platform or weighing bridge is registered by the indicator during
the specified period. By default, the auto power is off and must first be activated
in the Quick Menu. An overview and detailed explanations of the Quick Menu
see chapter 4.12.
4.6 Reseting the scale to zero
Press the Zeroing key to correct small deviations from the zero point, e.g. due
to contamination of the scale..
Zero range (legal for trade): max. +/- 2 % of the weighing range
Zero range (not legal for trade): selectable + / - 0,2,4,10,20,50,100 % of the
weighing range. If zeroing is not possible, appears in the display:
If the scale cannot be reset to "zero" with an applied weight, this range has
been exceeded or the scale is unstable.
To Next Page
Loading...