Version 4.0
2024-03-27
BOSCHE Weighing Systems
Page 29
Weighing Terminal EWI / MWI Operation | 4
4.9.3 Weighing with reference scale
When a reference scale is connected it can be changed between the connec-
ted scales by pressing this button..
The active scale is shown at the bottom of the display.
When a reference scale is connected, additionally, the determined piece weight
on the reference scale is accepted with the bulk scale. If this feature is not desi-
red, it can be deactivated in the Quick menu under "reference scale".
To Next Page
Loading...