Bosche EWI - Check Weighing; Setting Limit Values (Max.;Min.)

Version 4.0
2024-03-27
BOSCHE Weighing Systems
Page 49
Weighing Terminal EWI / MWI Operation | 4
4.13 Check weighing
With the check weighing (only MWI) you can specifically check weights. At the
check-weighing a beep sounds when the weight on the scale reaches or
exceeds a stored limit.
4.13.1 Setting limit values (max./min.)
Note
The set limits (max. / min.) are stored permanently and are also available after
a power failure, if the storage of the limit values is set to "on" in menu A01-02.
([DPSOH
YDOXHV
1x
3x
1x
3x